- Order number: 007-761503
Handlebar (560 mm) Red – For Mini Quad Sport 110-125cc and China Quads
Stylish Upgrade and Precise Control – Robust Handlebar with Sporty Look!
The handlebar is your direct point of contact with the quad and is crucial for control, ergonomics, and safety while riding. A bent or damaged handlebar must be replaced immediately to restore full steering capability. This handlebar not only provides the necessary stability but also sets a sporty optical accent with its striking red paint finish.
This Red Handlebar has a length of 56 cm (560 mm) and is a common replacement part for many 110cc to 125cc China Mini Quads, including models like the Mini Quad Sport 110/125. It is suitable for mounting the standard fittings, grips, and controls in this vehicle class.
Product Details and Benefits
-
Direct Control: Restores full and precise steerability of the quad.
-
Sporty Look: Striking red paint finish as an optical highlight.
-
Standard Dimension: Length of 56 cm (560 mm).
-
Broad Compatibility: Suitable for many 110cc and 125cc China Mini Quad models.
| Specification | Detail |
| Article Type | Handlebar (Lenker) |
| Color | Red |
| Length | 560 mm (56 cm) |
| Quality | High-Quality Replacement Part |
| Suitable for | Mini Quad Sport 110-125cc and many other China Mini Quads (110-125cc) |
| Article No. | 007-761503 |
Important Note on Verification and Compatibility
Since handlebars in Mini Quads can have different bends and mounts, precise verification is essential. Please visually compare the item with your old part. Also, please pay attention to all article information such as the total length (560 mm), the diameter in the clamping area, and the shape of the ends (for grips and fittings), to ensure the correct fit.
Installation Instructions (Intended as Guidance Only!)
Important Note: The handlebar is a safety-critical component. If you are unsure about the correct installation and torque settings, please have the work carried out by qualified specialist personnel. The following guide is intended only as assistance.
-
Preparation: Secure the quad and ensure the vehicle is stable.
-
Disassembly: Remove the grips, fittings, brake levers, and throttle from the old handlebar. Loosen the screws of the handlebar clamp(s) and remove the old handlebar.
-
Replacement: Place the new handlebar in the clamp and align it centrally and at the correct angle. Tighten the clamping screws evenly and with the prescribed torque.
-
Reassembly and Test: Reinstall all grips, fittings, and controls. Ensure that all cables and Bowden cables are freely movable and do not jam anywhere. Check the full steering movement in both directions.
Give your Mini Quad a new look and precise control! Order the Red Handlebar (Art. No. 007-761503)!
