- Order number: 076-621001
Optimal Stopping Power & Maximum Trail Safety! – Rear Brake Caliper with Pads for Tao Tao, Sunl, Coolster 125cc, 200cc, 250cc
Safety-Critical Hydraulic Component – Ready-to-install rear disc brake assembly for Chinese Quads & ATVs
Restore crisp braking response and dependable deceleration to your machine! This Premium Rear Hydraulic Brake Caliper is the perfect drop-in replacement for sticky, leaking, or worn-out stock calipers. It is specifically designed to fit a wide range of 125cc, 150cc, 200cc, and 250cc ATVs, quads, and dirt bikes from popular Chinese manufacturers including Tao Tao, Sunl, Coolster, Roketa, and Peace Sports.
The caliper comes fully assembled and includes a fresh set of brake pads, saving you time and effort during installation. Mud, water crossings, and aggressive trail debris put extreme stress on hydraulic brakes. Frozen pistons or cracked internal seals can lead to a dangerous spongy lever feel or total fluid loss. Upgrading to this heavy-duty cast aluminum caliper ensures solid clamping force when you need it most.
Technical Specifications & Details
-
Component: Rear Hydraulic Brake Caliper / Slave Cylinder Assembly.
-
Included: 1x Rear Caliper, 1x Set of pre-installed brake pads.
-
Material: High-grade, heat-dissipating cast aluminum alloy.
-
Compatibility: Fits numerous 125cc to 250cc Chinese utility and sport ATVs (e.g., TaoTao ATA series, Sunl, Kazuma, Coolster, Loncin, etc.).
Installation & Maintenance Instructions: (For guidance purposes only)
-
Visual Check: Before installation, perform a visual check. Match the mounting bolt hole spacing on the bracket, the banjo bolt fluid inlet location, and the pad shape precisely against your original part.
-
System Bleeding Required: Once the brake line is connected via the banjo bolt (always use fresh copper crush washers), the entire hydraulic system must be completely bled using fresh brake fluid (typically DOT 3 or DOT 4). Ensure no air bubbles remain in the lines, as air will cause a catastrophic loss of braking pressure. Clean the brake rotor with dedicated brake cleaner prior to testing