2 x Hexagon head screw M12 75MM for wishbone Bashan Shineray 200 - 250

2 Hexagon Screws M10 x 70MM – For Wishbone Bashan & Shineray 200 - 250 (Incl. Stop Nut)

Secure Wishbone Fastening – High-Quality Screws for Your Chassis!

The wishbone screws are extremely important for safety and the correct function of the suspension. They hold the wishbones in place and must withstand high shear forces and vibrations. Worn or corroded screws must be replaced immediately to ensure the stability of the chassis.

This set contains 2 high-quality hexagon screws with the dimension M10 x 70MM (thread length) including 2 matching M10 stop nuts (self-locking). The screws are "Made in Germany," ensuring high material quality and reliability.

They are suitable for fastening the wishbones (e.g., in combination with the silent bushings Art. 004-810401) on models such as:

• Shineray XY200STII

• Shineray STIIE-B

• Bashan BS200S-7

• Bashan BS200S-7A

• Bashan BS250-11B (STXE)

Product Details and Benefits

• High Safety: Essential for the stable mounting of the wishbones.

• Made in Germany: Guarantees high quality and load capacity.

• Complete Set: Includes matching M10 stop nuts (self-locking nuts).

• Precise Dimensions: Thread M10, shank length 70 mm (total length approx. 77 mm).

• Compatible: Suitable for many China Quad and ATV models in the 200cc-250cc class.

Important Note on Verification and Compatibility

Screws are highly stressed chassis parts. Before replacement, the required thread length (70 mm) and the thread (M10) must be precisely compared with your old part and the wishbone mount. Please visually compare the item with your old parts. In particular, check whether the length (70 mm) is sufficient to securely clamp all components and if the stop nut engages enough threads, to ensure correct and safe mounting.

Installation Instructions (Intended as Guidance Only!)

Important Note: Work on the chassis is safety-relevant and requires the utmost care. Always use the torque setting prescribed by the manufacturer. The following guide is intended only as assistance.

1. Preparation: Secure the quad and relieve the load on the affected wheel/chassis.

2. Disassembly: Remove the old nut and screw from the wishbone.

3. Replacement: Insert the new hexagon screw through the bushings and the frame/steering knuckle.

4. Assembly: Install the new stop nut (M10) and tighten the screw with the prescribed torque.

Secure the fastening of your wishbones with high-quality screws "Made in Germany"! Order the Set of 2 (Art. No. 001-810404)!