2 Tie Rod Ends Ball Joint for Hisun ATV HS 700 / HS 500

2 Tie Rod Ends Ball Joint for Hisun ATV HS 700 / HS 500: Precision and Safety for Your Steering

Restore the precise steering accuracy and driving safety of your Hisun ATV!

Tie rod ends are a critical link between the steering linkage and the wheel suspension. Wear on these ball joints quickly leads to imprecise steering behavior, shaking in the steering, and increased tire wear—a significant safety risk. This set contains two high-quality tie rod ends with the appropriate right-hand and left-hand threads to restore full stability and controllability to your Hisun ATV.

Product Details and Your Benefits

• Complete Set: You receive two tie rod ends (ball joints), which are generally required for one axle.

• Left-hand and Right-hand Thread: The set contains the necessary combination for correct track adjustment (steering rod).

• Long Service Life: Made from robust materials that permanently withstand the stresses of off-road use.

• Optimal Compatibility: Specifically designed for the Hisun HS700ATV and HS500ATV-2 models.

• Direct Replacement: The ends are designed for direct replacement of the original parts.

Important Note on Fit Accuracy (Attention!)

• Visual Comparison is Essential: Due to possible model or year differences, it is absolutely necessary that you visually compare the product images with the tie rod ends installed on your vehicle. Pay particular attention to:

  • Thread Sizes (not explicitly mentioned on the website, but crucial)

  • Thread Length

  • Shape and Angle of the Joint

Only through this comparison can you ensure one hundred percent fit accuracy and a problem-free installation.

Installation and Track Adjustment

The replacement of tie rod ends should ideally be carried out by a specialist workshop or a person with relevant technical experience, as correct track adjustment is critical for driving safety.

Steps for Orientation:

1. Measure: Before dismantling, measure the length of the tie rod (distance between the ball joints or the visible thread length).

2. Dismantling: Loosen the lock nut, remove the cotter pin, and loosen the nut on the steering knuckle. Press the ball joint out of the steering knuckle.

3. Replacement: Replace the old ball joint with the new one, ensuring that the new ball joint is screwed on to the originally measured length.

4. Securing: Fasten the end with the nut and secure it with a new cotter pin. Tighten the lock nut.

5. Track Adjustment: After replacing both ends, the track of your ATV must be professionally checked and readjusted in all cases to avoid uneven tire wear and unstable handling.

Invest in the safety and precision of your steering. Order the set of 2 tie rod ends today and ensure the best control over your Hisun ATV!