Product information "Front Right Brake Caliper – For Linhai ATV 400, 500 & M550 Models"
Front Right Brake Caliper – For Linhai ATV 400, 500 & M550 Models
Reliable Braking Power Right Side – Precise Brake Caliper for the Right Front!
The brake caliper is an essential component of your hydraulic disc brake system and is critical for deceleration performance and your safety. It ensures that hydraulic pressure controls the brake pads, pressing them against the brake disc. A defective brake caliper—whether due to leakage, seized pistons, or mechanical damage—leads to reduced braking efficiency and must be replaced immediately.
This Front Right Brake Caliper is the precise replacement, suitable for a wide range of Linhai ATV models, including the 400-2D, 500-D EFI, T3b, EURO 4 PRO MAX, M 550 EFI, and M 550L Europe EFI. It restores full, even, and reliable braking function to the right front axle.
Product Details and Benefits
High Safety: Restores full and even braking performance on the front axle.
Precise Fit: Specifically designed for the right front side of the listed Linhai models.
Broad Compatibility: Fits many common Linhai models in the 400 and 500 class.
Specification
Detail
Article Type
Brake Caliper (Front Right)
Quality
High-Quality Replacement Part
Suitable for
Linhai ATV 400-2D, 500-D EFI T3b, ATV 500-D EURO 4 PRO MAX, M 550 EFI, M 550L Europe EFI, etc.
Article No.
062-620701
Important Note on Verification and Compatibility
Since brake components can vary in different model years and versions, precise verification is essential. Please visually compare the item with your old part. Also, please pay attention to all article information such as the dimensions of the mounting holes, the alignment of the brake line, and the position of the bleeder nipple (mirror image of the left caliper), to ensure the correct fit.
Installation Instructions (Intended as Guidance Only!)
Important Note: Brakes are life-critical safety components and require the utmost care. Anyone who is unsure or does not possess the necessary specialized knowledge should have this work carried out by qualified personnel. The following guide is intended only as assistance.
Preparation: Secure the ATV, lift the vehicle, and disassemble the front right wheel.
Disassembly: Disconnect the brake line from the caliper. Use a suitable container for brake fluid! Remove the two mounting bolts holding the caliper to the steering knuckle.
Replacement: Mount the new brake caliper with new bolts (if required) to the steering knuckle. Connect the brake line correctly.
Bleeding: After replacement, the brake system must be bled carefully and completely to remove all air bubbles and ensure a firm brake point. Always use the manufacturer's specified brake fluid.
Test: Check that all bolts are tight and test the brake function while stationary before the first ride.
Restore the reliable braking performance of your Linhai ATV! Order the Front Right Brake Caliper (Art. No. 062-620701)!
Related links to "Front Right Brake Caliper – For Linhai ATV 400, 500 & M550 Models"
