Front Left Brake Caliper – For Linhai ATV 400, 500 & M550 Models

Front Left Brake Caliper – For Linhai ATV 400, 500 & M550 Models

Restoring Braking Power – Precise Brake Caliper for the Left Front Side!

The brake caliper is a core component of the disc brake system and is crucial for the deceleration and safety of your ATV. Inside the caliper, hydraulic pressure pushes the brake pads against the brake disc. Wear, leaky pistons, or seized brake pads can drastically reduce braking performance and pose a high safety risk.

This Front Left Brake Caliper is the precise replacement with the manufacturer number 70520. It is suitable for a wide range of Linhai ATV models, including the 400-2D, 500-D EFI, T3b, EURO 4 PRO MAX, M 550 EFI, and M 550L Europe EFI. It ensures the immediate restoration of reliable braking function.

Product Details and Benefits

• Original OEM Number: Manufacturer number 70520 (Linhai).

• High Safety: Restores full and even braking performance on the front axle.

• Precise Fit: Specifically for the front left side of the listed Linhai models.

• Broad Compatibility: Fits many common Linhai models in the 400 and 500 class.

Important Note on Verification and Compatibility

Since brake components can vary in different model years and versions, precise verification is essential. Please visually compare the item with your old part. Also, please pay attention to all article information such as the dimensions of the mounting holes, the design of the brake piston, and the position of the bleeder nipple (as pictured), to ensure the correct fit.

Installation Instructions (Intended as Guidance Only!)

Important Note: Brakes are life-critical safety components and require the utmost care. Anyone who is unsure or does not possess the necessary specialized knowledge should have this work carried out by qualified personnel. The following guide is intended only as assistance.

1. Preparation: Secure the ATV, lift the vehicle, and disassemble the front left wheel.

2. Disassembly: Disconnect the brake line from the caliper. Use a suitable container for brake fluid! Remove the two mounting bolts holding the caliper to the steering knuckle.

3. Replacement: Mount the new brake caliper with new bolts (if required) to the steering knuckle. Connect the brake line correctly.

4. Bleeding: After replacement, the brake system must be bled carefully and completely to remove all air bubbles and ensure a firm brake point. Always use the manufacturer's specified brake fluid.

5. Test: Check that all bolts are tight and test the brake function while stationary before the first ride.

Restore the reliable braking performance of your Linhai ATV! Order the Front Left Brake Caliper (Art. No. 062-620702)!