2 Pieces Lower Control Arm Ball Joint M12 – For EGL Lyda / Madmax 250

Suspension Set: 2x Lower Control Arm Ball Joint M12 

2 Pieces Lower Control Arm Ball Joint M12 – For EGL Lyda / Madmax 250 & many China Quad Models

The lower ball joints of your control arms are crucial for the driving stability and precise steering of your quad. They are constantly subjected to high shock and tensile forces and wear out over time, leading to rattling, imprecise handling, and axial play.

This set offers you two new, robust ball joints in OEM quality for the lower control arm mount on your EGL Lyda / Madmax 250. With the M12 thread and the precise insertion depth of 24mm, they are a direct replacement that immediately restores the safety and handling of your quad. Thanks to the standardized dimensions, they also fit many other 250cc China Quad models.

✨ Your Benefits at a Glance:

• Complete Set: You receive two pieces for the lower control arm mount (left and right).

• Stable Steering: Eliminates play and improves driving control and stability.

• High Durability: Manufactured for the high stresses of off-road use.

• Broad Compatibility: Universally suitable for EGL, Madmax, and many other China Quads with M12 thread.

✅ Specifications and Fitment:

This set is intended for the suspension/chassis in the following models:

Important Dimensions (Must be compared with the old part before ordering!):

• Diameter (Base): 32mm

• Thread: M12

• Insertion Depth: 24mm

⚠️ Important Installation Notes:

1. Safety Relevance: Suspension components are safety-critical. Installation should be carried out with the correct tightening torque.

2. Securing: Use a medium-strength Threadlocker (Loctite) on the thread to prevent the lock nut from loosening due to vibrations.

3. Axle Boots: Check and protect the Axle Boots/Dust Covers of the joint; damage leads to rapid wear.

Invest in the safety and stability of your quad – with this set of 2 ball joints!